The mold is the mother of industry. It is precisely because of the existence of the mold that the product can be reproduced in large quantities. The injection mold has become an increasingly widely used part of the mold field. The injection mold plant needs to involve in the process of producing the injection mold. To a variety of precision equipment, the final injection molding can be completed after the completion of the production, then the general injection mold factory which equipment?
Milling machines: Machines with a variety of surfaces are machined on a workpiece with a milling cutter; milling machines can perform milling, drilling and boring operations on the workpiece.
Drilling machine: The machine tool that drills holes on the workpiece. The drilling machine has a simple structure and relatively low machining accuracy. It can drill through holes, blind holes, replace special tools, and can expand, boring, reaming or tapping.
Lathe: A lathe that turns a rotating workpiece with a turning tool. Lathes, reamers, reamers, taps, dies and knurling tools can also be used for machining on lathes.
Tai Shui Mill: The workpiece is rotated and ground with a grinding wheel so that it can achieve the required flatness. According to the shape of the table, it can be divided into two types: a rectangular table and a circular table. The main parameters of the rectangular table surface grinder are the width and length of the table. The main parameter of the round table surface grinder is the diameter of the table top. According to different types of shafts, it can be divided into horizontal and vertical shafts. Due to the large amount of heat generated during the work process, a large amount of coolant (usually water and sometimes oil) is used. Therefore, the name of the large water grinder was obtained.
CNC machining center: CNC machining center is a numerical control system controlled CNC machine tool that can process very complex and difficult workpieces. It can't be compared with common ordinary machine tools. The effect of machining workpieces is very good and the efficiency is very high. All operations can be performed after the workpiece has been clamped once, because the CNC machining center comes with a tool magazine to perform automatic tool change.
EDM: EDM (Electrical Discharge Machining) is a kind of machining equipment mainly used for EDM. Widely used in the manufacture of various metal molds and mechanical equipment. It is a special processing method for etching conductive material by electric erosion generated when the two-pole pulse discharge is immersed in the working fluid. It is also called electric discharge machining or electric erosion machining.
Wire cutting: Wire Electrical Discharge Machining (WEDM), which belongs to the category of electric processing, was discovered by the former Soviet Union's Razakenko and the couple to study the phenomenon and causes of damage caused by the spark discharge corrosion of the switch contacts. Instantaneous high temperatures can melt and oxidize localized metals and erode them, creating and inventing EDM methods. The wire cutting machine was also invented in the former Soviet Union in 1960, and China was the first country used for industrial production.
